PHY6212 Application Notes
PhyPlus's chips PHY6212 and PHY6202 do not share the same set of Application Notes, only some ANS are shared.
- GPIO Application Note
- ADC Application Note
-
ANCS Application Note
-
BurnMode And DebugMode Note
-
FCT Note
-
Font Application Note
-
FS Application Note
-
TAKE A Note
-
UART FlashWrite Protocol
-
AliGenie Application Note
You can also download the PHY6212 Application Notes collection directly:
| title | Version Number | illustrate | download |
|---|---|---|---|
PHY62XX GPIO Application Note |
v1.0 |
GPIO, short for General-Purpose Input/Output, is a general-purpose pin that can be dynamically configured and controlled during software execution. PHY6212 GPIO supports up to 35 IOs, of which TEST_MODE is used to control the program mode, and other IOs can be configured and used as needed. |
download |
PHY62XX ADC Application Note |
v1.0 |
This document introduces the principle and usage of the PHY6212 ADC module. PHY6212 ADC has a total of 9 ADC channels: 1 PGA, 1 Temp Sensor, 6 Normal ADCs, and 1 Voice. |
download |
PHY62XX ANCS Application Note |
v1.0 |
This document introduces the implementation of the service part of ANCS (Apple Message Center Service) in PHY6212 SDK and related applications. The purpose of Apple Notification Center Service (ANCS) is to provide Bluetooth peripherals with a simple and convenient way to obtain notification information from iOS devices. |
download |
PHY62XX BurnMode And DebugMode Application Note |
v1.0 | PHY6212 has two modes: Flash programming mode and Flash running debugging mode. | download |
PHY6212 FCT Application Note |
v1.0 | PHY6212 products support FCT mode, which is an authentication method for Flash Access and JTAG Debug. | download |
PHY62XX Font Application Note |
v1.0 |
PHY6212 Font library provides multi-language, configurable font solutions. The font library solution consists of two parts: "PHY62XX Font library+ API " and "PHY62XX multi-language font library". |
download |
PHY62XX FS Application Note |
v1.0 | This document introduces the principle and usage of the PHY6212 FS module (hereinafter referred to as FS). It can help you understand the API provided by FS. You can refer to samples to quickly develop actual products. | download |
PHY62XX OTA Note |
v2.0 | PHY6212 OTA is used for wireless upgrade of application firmware, resource files and OTA Bootloader itself. If the application firmware needs to support OTA function, it needs to load OTA App service. | download |
PHY62XX UART FlashWrite Protocol |
v1.0 | This document mainly introduces the Flash programming process of the PHY6212 chip, the Flash single address writing process, the UART baud rate change process, common interactive commands, HEX file parsing, and Flash Mapping. | download |
PHY62XX AliGenie Application Note |
v1.0 | This article briefly introduces the instructions for connecting the PHY6212 chip to Tmall Genie, mainly including platform operation, firmware and configuration file burning, and connecting PHY6212 to Tmall Genie. | download |
Related Links
Contact Us
3/F, Building 23, Lane 676, Wuxing Road, Pudong New Area, Shanghai