PHY6230
- Key Features
- Overview
- Specification
- Documentation
- Get Started
-
PHY6230 is a cost-effective wireless communication system-level chip, integrating a 32-bit processor (up to 64MHz), supporting USB 2.0 and lithium battery charging, RF sensitivity -96dBm@BLE 1Mbps, peak transmit and receive power 10/10mA, and providing a variety of packaging solutions, taking into account the needs of personal peripheral products for stable connection and cost sensitivity. It has a full communication protocol stack with independent intellectual property rights and supports the coexistence of multiple protocol stacks such as Bluetooth LE/private label 2.4G.
PHY62 series chips are widely used in industrial/consumer fields such as smart home, smart wearables, smart lighting, industrial control, medical health, AI voice, new energy vehicles, etc. The chips have high cost-effectiveness and high reliability, and have been delivered to more than 100 IoT customers at home and abroad.Downloads
Highlights
Flexible, secure, high-performance, low-power system-level chip architecture
Possessing one of the very few full communication solutions with independent intellectual property rights in China
High-performance multi-mode RF transceiver, average application power consumption <10uA in multiple scenarios
Powerful RF linkbuget meets the wireless application requirements of complex usage scenarios
Solve the problems of wireless connection stability and low power consumption in complex scenarios
Chip adaptive calibration, conventional device deviations meet wide temperature range, such as crystal frequency deviation, temperature drift, aging, etc.
Storage resources meet industrial-grade high-temperature reliability Storage resources meet industrial-grade high-temperature reliability
Anti-power interference, meet complex power conditions
The minimum BOM only requires [a 1uF capacitor + a 16MHz crystal oscillator]
Procotols
Scenarios
Wireless Mouse 
Gamepad 
Personal Peripherals 
Selfie
Other mass-produced applications: Bluetooth beacon丨Apple Findmy丨New energy charging pile丨Electricity meter丨Fire smoke sensor丨Smart street light... -
- 32-bit Processor (Max 64MHz) with SWD
- Memory
- 64KB ROM
- 8KB Retention SRAM
- 16KB OTP
- EEPROM (optional)
- 19/11/3 General Purpose I/O Pins
- configurable as serial interface and programmable IO MUX function mapping
- All pins can be configured for wake-up
- All pins for triggering interrupt
- 3 Quadrature Decoder(QDEC)
- 6-channel PWM
- 1-channel I2C
- 1-channel SPI Master
- UART
- SWD
- USB 2.0
- 10-channel 12bit ADC
- 4-channel 32-bit Timer, 1 Watchdog Timer
- Real Timer Counter (RTC)
- Power, Clock, Reset Controller
- Flexible power management
- Operating Voltage range 1.8V to 5.0V
- Support lithium battery charging
- Embedded LDOs
- Battery monitor: support low battery detection
- Power consumption
- 0.7uA @ OFF Mode (IO wake up only)
- 2uA @ Sleep Mode with 32KHz RTC
- Receive mode: 10mA @3.3V power supply
- Transmit mode: 10mA (0dBm output power) @3.3V power supply
- RC Oscillator Hardware Calibrations
- Internal High/Low frequency RC osc
- 32KHz RC osc for RTC with +/-200ppm accuracy
- 32MHz RC osc for HCLK with 3% accuracy
- BLE
- Bluetooth SIG 5.4
- Support Master & Slave
- 2.4 GHz transceiver
- Support BLE 5.4 RF PHY 1Mbps/2Mbps
- Proprietary 500K Protocol Stack
- FSK with configurable Gaussian filter (configurable modulation index)
- Sensitivity
- -96dBm@BLE 1Mbps data rate
- -93dBm@BLE 2Mbps data rate
- TX Power -20 to +10dBm in 3dB steps
- Single-pin antenna: no RF matching or RX/TX switching required
- RSSI (1dB resolution)
- Antenna array and optional off-chip RF PA/LNA control interface
- AES-128 Encryption Hardware
- Operating temperature: -40℃~+125℃
- RoHS Package: QFN24/ SSOP24/SOP16/TSSOP8/SOP8/ MSOP10
Downloads
-
-
Recommended Development Tools
Contact Us
3/F, Building 23, Lane 676, Wuxing Road, Pudong New Area, Shanghai